TB6612FNG SSOP-24 Dual DC Motor Controller Driver IC With Two input signals

Description

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.

Logic supply voltage (VCC) can be in the range of 2.7--5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

This little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.

Features

ATFU Electronics LTD is a professional distributor of imported original integrated circuit chip with 7 years experience.

ATFU mainly focus on LED Driver IC, MCU chip, Flash memory chip and programmerable chip IC at the very beginning.

With the development of ATFU, also based on the value to meet client's need, ATFU expand to Diode and capacitor too these years.

As Our Founder Mr Bin said, The most important thing in bussiness is turst, and how you convince people, firstly you should be honest.

In ATFU team, all people are honest to client, we try our best to give advices, we try our best to serve each client, we try our best to be client's best support. This is how ATFU growing, grown with fast speed. 

We sincerely hope could start our business with anyone who need components chip in this world, come and contact me now for any.